Description
ADR 1 Explosive substances and articles label — basis for use
The ADR 1 Explosive substances and articles 100 × 100 mm label is intended for marking packages containing dangerous goods classified under ADR class 1. This class includes explosive substances and articles which, due to their properties, may present particular risks during transport, storage, handling and logistics operations.
Class 1 marking is used for shipments where the goods classification, UN number, compatibility group, hazard division and transport documentation indicate the need to use a hazard label for explosive substances and articles. Depending on the type of substance or article, the documentation may include additional information such as division 1.1, 1.2, 1.3, 1.4, 1.5 or 1.6 and the compatibility group letter.
The ADR class 1 label is not a general confirmation that a shipment is accepted for transport. Its use should result from correct goods classification and complete transport documentation. Before use, make sure that the substance or article actually requires class 1 marking and that the selected label variant matches the requirements for the specific shipment.
In practice, the ADR 1 Explosive substances and articles marking may be used when preparing shipments containing explosive substances, pyrotechnic articles, technical components containing explosive materials, selected specialist products and other goods classified as class 1 according to the relevant documentation.
The class 1 hazard label provides important information for everyone involved in transport. It helps warehouse staff, carriers, drivers, loading and unloading personnel, inspection authorities and emergency responders identify the hazard quickly.
The choice of marking should always be checked against current ADR regulations, goods classification, UN number, safety data sheet, packing instruction, transport documentation, carrier requirements and internal company procedures. In case of doubt, consultation with an ADR dangerous goods adviser or a person responsible for dangerous goods transport is recommended.
Where and how to use the ADR 1 Explosive substances and articles 100 × 100 mm label
The ADR 1 Explosive substances and articles 100 × 100 mm label should be used on packages containing dangerous goods of class 1 that require hazard label marking. It can be applied to cartons, individual packages, outer packages, crates, containers, pallets, overpacks and other units prepared for transport.
The square 100 × 100 mm format corresponds to the typical format used for ADR labels on packages. The shape makes it convenient to apply the marking to a flat packaging surface, next to the UN number, transport documents, additional markings or other required hazard labels.
The label should be applied in a clearly visible place on the outside of the package. It should not be covered by packing tape, stretch film, waybill, courier label, carton edge, securing strap or another marking. The marking must remain legible from the moment the shipment is prepared until transport is completed.
Before application, the packaging surface should be clean, dry, free from grease and as smooth as possible. This is particularly important for coated cartons, film packaging, crates, containers, plastics and surfaces exposed to dust, moisture, grease or product residues.
For overpacks and outer packages, make sure that the required markings remain visible from the outside. If ADR labels on inner packages are covered by an outer carton, stretch film, crate or pallet, the markings should be repeated on the outside of the overpack according to the requirements for the specific shipment.
Before shipment, it is worth checking:
- whether the goods have been correctly classified under ADR class 1,
- whether the ADR 1 label meets the requirements for the specific UN number,
- whether the division and compatibility group match the documentation,
- whether the label has been applied to a visible part of the package,
- whether the marking has not been covered by film, tape, documents or other labels,
- whether the package meets the requirements for the specific type of goods,
- whether additional labels, UN numbers, LQ marks, environmental marks or orientation arrows are required,
- whether the marking is consistent with the transport documentation,
- whether carrier requirements are consistent with the selected marking method.
The label is suitable for production companies, warehouses, logistics centres, shipping departments, laboratories, technical wholesalers, specialist facilities, export companies and businesses preparing class 1 dangerous goods for domestic and international transport.
Quality of Print&Stick ADR 1 labels
Print&Stick ADR 1 Explosive substances and articles 100 × 100 mm labels have been designed for clear and repeatable marking of packages containing dangerous goods. The square shape and 100 × 100 mm format make the label easy to apply to different packaging types and help maintain a consistent shipment marking system.
The labels are made from self-adhesive paper, allowing quick application without additional glue, tape or holders. The self-adhesive format works well in daily warehouse operations, at packing stations and when preparing larger quantities of shipments in series.
The durable acrylic adhesive provides good adhesion to typical packaging surfaces such as cardboard, paper, board, outer packages, containers and selected plastic surfaces. Good adhesion helps reduce the risk of the label peeling off during storage, order picking, handling, sorting and transport.
The print is protected with UV varnish, which helps protect the graphics and label content against factors encountered during everyday logistics handling. This keeps the marking readable and visually neat during packing, storage and transport.
The product is supplied on a roll containing 500 labels. This roll format supports convenient storage, fast peeling and serial application. It works well in warehouses, shipping departments, production companies, logistics centres and businesses that regularly prepare dangerous goods for transport.
Repeatable production helps maintain a consistent appearance of successive label batches, stable format, readable print and neat package marking.
Label production is carried out in accordance with quality and environmental management standards consistent with ISO 9001 and ISO 14001. For users, this means stable product quality, repeatable workmanship and markings suitable for regular storage, packing and transport processes.
Technical specifications
- Name: Self-adhesive ADR 1 Explosive substances and articles label
- Marking type: ADR class 1 hazard label
- Hazard class: 1 — explosive substances and articles
- Shape: square ADR label
- Label size: 100 × 100 mm
- Material: self-adhesive paper
- Adhesive: durable acrylic adhesive
- Print protection: UV varnish
- Supply format: roll
- Roll content: 500 labels per roll
- Package content: 1 roll = 500 labels
- Application: marking packages, shipments and transport units containing class 1 dangerous goods
- Industries: ADR transport, logistics, warehouses, production, export, distribution, companies preparing dangerous goods for transport
