The ADR 2.2 Non-flammable, non-toxic gases 100 \u00d7 100 mm<\/strong> label is intended for marking packages containing dangerous goods classified under ADR class 2, division 2.2<\/strong>. Class 2 covers gases, while division 2.2 applies to non-flammable, non-toxic gases, meaning gases that are not classified as flammable gases of division 2.1 or toxic gases of division 2.3.<\/p>\n The ADR 2.2 Non-flammable, non-toxic gases<\/strong> marking is used when the goods classification, UN number, safety data sheet, transport documentation and packing instruction indicate the need to use a hazard label for gases of division 2.2. This group may include selected compressed gases, liquefied gases, gases dissolved under pressure, asphyxiant gases, oxidising gases and other products classified under division 2.2 according to the relevant documentation.<\/p>\n Non-flammable, non-toxic gases may appear less hazardous than flammable or toxic gases, but they still require proper marking and careful handling. Depending on the type of gas, container, cylinder or aerosol, hazards may be associated with pressure, leakage, sudden gas release, reduced oxygen concentration in the surrounding area, low temperature effects, oxidising properties or damage to the package during transport.<\/p>\n The ADR 2.2 label is not a standalone confirmation that goods are accepted for transport. Its use should result from correct goods classification and complete transport documentation. Before use, make sure that the substance, mixture or article actually requires 2.2<\/strong> marking and that the selected label matches the requirements for the specific shipment.<\/p>\n In practice, the ADR 2.2 Non-flammable, non-toxic gases<\/strong> marking may be used when preparing shipments containing gas cylinders, gas cartridges, aerosol containers, cartridges, technical gas containers, shielding gases, laboratory gases, medical gases and other dangerous goods classified under division 2.2. The use of the label should always result from the classification of the specific product, UN number and transport documents, not only from the trade name of the goods.<\/p>\n The division 2.2 hazard label provides important information for people involved in transport. It helps warehouse staff, carriers, drivers, loading and unloading personnel, inspection authorities and emergency responders identify the type of hazard.<\/p>\n The choice of marking should always be checked against current ADR regulations, goods classification, UN number, safety data sheet, packing instruction, transport documentation, carrier requirements and internal company procedures. In case of doubt, consultation with an ADR dangerous goods adviser or a person responsible for dangerous goods transport is recommended.<\/p>\n The ADR 2.2 Non-flammable, non-toxic gases 100 \u00d7 100 mm<\/strong> label should be used on packages containing class 2, division 2.2 dangerous goods that require hazard label marking. It can be applied to cartons, individual packages, outer packages, containers, crates, pallets, overpacks and other units prepared for transport.<\/p>\n The square 100 \u00d7 100 mm<\/strong> format corresponds to the typical format used for ADR labels on packages. The shape makes it convenient to apply the marking to a flat packaging surface, next to the UN number, transport documents, additional markings or other required hazard labels.<\/p>\n The label should be applied in a clearly visible place on the outside of the package. It should not be covered by packing tape, stretch film, waybill, courier label, carton edge, securing strap or another marking. The marking should remain legible from the moment the shipment is prepared until transport is completed.<\/p>\n Before application, the packaging surface should be clean, dry, free from grease and as smooth as possible. This is particularly important for coated cartons, film packaging, containers, crates, plastics and surfaces exposed to dust, moisture, grease or product residues.<\/p>\n For overpacks and outer packages, make sure that the required markings remain visible from the outside. If ADR labels on inner packages are covered by an outer carton, stretch film, crate or pallet, the markings should be repeated on the outside of the overpack according to the requirements for the specific shipment.<\/p>\n For non-flammable, non-toxic gases, readability of the marking is especially important when transport units may be inspected, handled, sorted or temporarily stored. The marking should allow quick recognition that the shipment contains a division 2.2 gas and requires appropriate handling, especially in the case of cylinders, pressure containers, asphyxiant gases, oxidising gases or gases transported under special conditions.<\/p>\n Before shipment, it is worth checking:<\/p>\n The label is suitable for production companies, warehouses, logistics centres, shipping departments, laboratories, technical wholesalers, chemical plants, technical gas distributors, medical gas suppliers, online stores and businesses preparing class 2.2 dangerous goods for domestic and international transport.<\/p>\n Print&Stick ADR 2.2 Non-flammable, non-toxic gases 100 \u00d7 100 mm<\/strong> labels have been designed for clear and repeatable marking of packages containing dangerous goods. The square shape and 100 \u00d7 100 mm<\/strong> format make the label easy to apply to different packaging types and help maintain a consistent shipment marking system.<\/p>\n The labels are made from self-adhesive paper, allowing quick application without additional glue, tape or holders. The self-adhesive format works well in daily warehouse operations, at packing stations and when preparing larger quantities of shipments in series.<\/p>\n The durable acrylic adhesive provides good adhesion to typical packaging surfaces such as cardboard, paper, board, outer packages, containers and selected plastic surfaces. Good adhesion helps reduce the risk of the label peeling off during storage, order picking, handling, sorting and transport.<\/p>\n The print is protected with UV varnish, which helps protect the graphics and label content against factors encountered during everyday logistics handling. This keeps the marking readable and visually neat during packing, storage and transport.<\/p>\n The product is supplied on a roll containing 500 labels<\/strong>. This roll format supports convenient storage, fast peeling and serial application. It works well in warehouses, shipping departments, production companies, logistics centres and businesses that regularly prepare dangerous goods for transport.<\/p>\n Repeatable production helps maintain a consistent appearance of successive label batches, stable format, readable print and neat package marking.<\/p>\n Label production is carried out in accordance with quality and environmental management standards consistent with ISO 9001<\/strong> and ISO 14001<\/strong>. For users, this means stable product quality, repeatable workmanship and markings suitable for regular storage, packing and transport processes.<\/p>\n The 100 \u00d7 100 mm \u2014 ADR 2.2 Non-flammable, non-toxic gases<\/strong> self-adhesive label is used to mark shipments, packages and transport units containing gases classified under ADR division 2.2<\/strong>.<\/p>\n It is a square ADR label in the standard 100 \u00d7 100 mm<\/strong> format, designed for clear marking of packages in dangerous goods transport. The 2.2<\/strong> marking refers to non-flammable, non-toxic gases which, despite not being flammable or toxic, may still require special handling due to pressure, possible oxygen displacement, oxidising properties or storage conditions.<\/p>\n The product is supplied on a roll \u2014 1 roll = 500 labels<\/strong>. The labels are made from self-adhesive paper, feature a durable acrylic adhesive, and the print is protected with UV varnish.<\/p>\n","protected":false},"featured_media":33389,"template":"","meta":{"_acf_changed":false,"inline_featured_image":false},"product_brand":[],"product_cat":[794],"product_tag":[],"class_list":["post-23229","product","type-product","status-publish","has-post-thumbnail","product_cat-adr-danger-labels","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"acf":[],"yoast_head":"\nWhere and how to use the ADR 2.2 Non-flammable, non-toxic gases 100 \u00d7 100 mm label<\/h2>\n
\n
Quality of Print&Stick ADR 2.2 labels<\/h2>\n
Technical specifications<\/h2>\n
\n