The ADR 1.5 Explosive substances 100 \u00d7 100 mm<\/strong> label is intended for marking packages containing dangerous goods classified under ADR class 1, division 1.5<\/strong>. Class 1 covers explosive substances and articles, while division 1.5 refers to very insensitive explosive substances that have a mass explosion hazard.<\/p>\n In practice, division 1.5<\/strong> includes substances that, due to their low sensitivity, have a very low probability of initiation or transition from burning to detonation under normal transport conditions. This does not mean there is no hazard. Goods in this division still belong to class 1 and require correct classification, suitable packaging, documentation and marking according to the requirements for the specific shipment.<\/p>\n The ADR 1.5 Explosive substances<\/strong> marking is used when the goods classification, UN number, division, compatibility group, transport documentation and packing instruction indicate the need to use a hazard label for explosive substances of division 1.5. Depending on the type of goods, the documentation may also include a compatibility group letter and additional requirements concerning packaging, quantities, transport and storage.<\/p>\n The ADR 1.5 label is not a standalone confirmation that goods are accepted for transport. Its use should result from correct goods classification and complete transport documentation. Before use, make sure that the substance actually requires 1.5<\/strong> marking and that the selected label matches the requirements for the specific shipment.<\/p>\n In practice, the ADR 1.5 Explosive substances<\/strong> marking may be used when preparing shipments containing certain very insensitive explosive substances and other goods classified under division 1.5 according to the relevant documentation. The use of the label should always result from the classification of the specific product, UN number and transport documents, not only from the trade name of the goods.<\/p>\n The division 1.5 hazard label provides important information for people involved in transport. It helps warehouse staff, carriers, drivers, loading and unloading personnel, inspection authorities and emergency responders identify the type of hazard.<\/p>\n The choice of marking should always be checked against current ADR regulations, goods classification, UN number, division, compatibility group, safety data sheet, packing instruction, transport documentation, carrier requirements and internal company procedures. In case of doubt, consultation with an ADR dangerous goods adviser or a person responsible for dangerous goods transport is recommended.<\/p>\n The ADR 1.5 Explosive substances 100 \u00d7 100 mm<\/strong> label should be used on packages containing class 1, division 1.5 dangerous goods that require hazard label marking. It can be applied to cartons, individual packages, outer packages, crates, containers, pallets, overpacks and other units prepared for transport.<\/p>\n The square 100 \u00d7 100 mm<\/strong> format corresponds to the typical format used for ADR labels on packages. The shape makes it convenient to apply the marking to a flat packaging surface, next to the UN number, transport documents, additional markings or other required hazard labels.<\/p>\n The label should be applied in a clearly visible place on the outside of the package. It should not be covered by packing tape, stretch film, waybill, courier label, carton edge, securing strap or another marking. The marking should remain legible from the moment the shipment is prepared until transport is completed.<\/p>\n Before application, the packaging surface should be clean, dry, free from grease and as smooth as possible. This is particularly important for coated cartons, film packaging, crates, containers, plastics and surfaces exposed to dust, moisture, grease or product residues.<\/p>\n For overpacks and outer packages, make sure that the required markings remain visible from the outside. If ADR labels on inner packages are covered by an outer carton, stretch film, crate or pallet, the markings should be repeated on the outside of the overpack according to the requirements for the specific shipment.<\/p>\n Before shipment, it is worth checking:<\/p>\n The label is suitable for production companies, warehouses, logistics centres, shipping departments, laboratories, technical wholesalers, specialist facilities, export companies and businesses preparing class 1.5 dangerous goods for domestic and international transport.<\/p>\n Print&Stick ADR 1.5 Explosive substances 100 \u00d7 100 mm<\/strong> labels have been designed for clear and repeatable marking of packages containing dangerous goods. The square shape and 100 \u00d7 100 mm<\/strong> format make the label easy to apply to different packaging types and help maintain a consistent shipment marking system.<\/p>\n The labels are made from self-adhesive paper, allowing quick application without additional glue, tape or holders. The self-adhesive format works well in daily warehouse operations, at packing stations and when preparing larger quantities of shipments in series.<\/p>\n The durable acrylic adhesive provides good adhesion to typical packaging surfaces such as cardboard, paper, board, outer packages, containers and selected plastic surfaces. Good adhesion helps reduce the risk of the label peeling off during storage, order picking, handling, sorting and transport.<\/p>\n The print is protected with UV varnish, which helps protect the graphics and label content against factors encountered during everyday logistics handling. This keeps the marking readable and visually neat during packing, storage and transport.<\/p>\n The product is supplied on a roll containing 500 labels<\/strong>. This roll format supports convenient storage, fast peeling and serial application. It works well in warehouses, shipping departments, production companies, logistics centres and businesses that regularly prepare dangerous goods for transport.<\/p>\n Repeatable production helps maintain a consistent appearance of successive label batches, stable format, readable print and neat package marking.<\/p>\n Label production is carried out in accordance with quality and environmental management standards consistent with ISO 9001<\/strong> and ISO 14001<\/strong>. For users, this means stable product quality, repeatable workmanship and markings suitable for regular storage, packing and transport processes.<\/p>\n The 100 \u00d7 100 mm \u2014 ADR 1.5 Explosive substances<\/strong> self-adhesive label is used to mark shipments, packages and transport units containing explosive substances classified under ADR division 1.5<\/strong>.<\/p>\n It is a square ADR label in the standard 100 \u00d7 100 mm<\/strong> format, designed for clear marking of packages in dangerous goods transport. The 1.5<\/strong> marking refers to very insensitive explosive substances that have a mass explosion hazard but, under normal transport conditions, have a very low probability of initiation or transition from burning to detonation.<\/p>\n The product is supplied on a roll \u2014 1 roll = 500 labels<\/strong>. The labels are made from self-adhesive paper, feature a durable acrylic adhesive, and the print is protected with UV varnish.<\/p>\n","protected":false},"featured_media":23140,"template":"","meta":{"_acf_changed":false,"inline_featured_image":false},"product_brand":[],"product_cat":[794],"product_tag":[],"class_list":["post-23220","product","type-product","status-publish","has-post-thumbnail","product_cat-adr-danger-labels","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"acf":[],"yoast_head":"\nWhere and how to use the ADR 1.5 Explosive substances 100 \u00d7 100 mm label<\/h2>\n
\n
Quality of Print&Stick ADR 1.5 labels<\/h2>\n
Technical specifications<\/h2>\n
\n